The evaporator outlet is not at a right angle to the back of the evaporator as pictured. For my application, 1994 Toyota pickup, the outlet tube must be as pictured. If you carefully bend the tube it will work just fine, albeit a little shorter than OEM. Hint: bend the tube before removing the nitrogen charge so you will know if you created a leak. Also it does not quite fit in the OEM evaporator box and the box has to be modified to accept this larger unit. The inlet tube is correct and the threads for both tubes were correct also. After a few adjustments, my AC is blowing cold again.TL;DR: not a perfect fit, but works after some fiddling.
