DescriptionBoost Cooler Stage 2 VC-50 Control Unit UpgradeVariable Injection via Boost Pressure. For all Turbo and Supercharged Engines up to 3.5 Bar Boost Pressure.The Boost Cooler VC-50 control unit from SNOW Performance regulates the water or water-alcohol injection quantity progressively to the boost pressure. Once the desired start and full injection time (boost pressure) is entered on the OLED screen and the controller creates an injection curve for the optimal injection.As well as the primary injection nozzle, an additional nozzle can optionally be activated separately. The “power nozzle” is also activated at high engine load and enables an increased total injection at full load. The Dual Stage Upgrade is required for this.Above all, the progressive injection of water or water / methanol, based on the boost pressure is quite precise and has a positive effect on cooling and engine performance over a wide load. In particular, an additional nozzle in the full load range, has a positive effect on the overall performance of the system.Recommended for all turbo and radial compressor engines as well as turbo diesel engines up to about 3.5 bar boost pressure.Product Features:Electronically controlled injection via boost pressure / MAPIt can be used up to 3.5bar boost pressure52mm controller with color-adjustable OLED display (7 colors)Display of Boost Pressure (bar), Injection Quantity, Fluid Level, Power Nozzle Activation and Error CodesPrime / Pump Test ButtonFor all Turbo Diesel and Gasoline Engines with Turbo or Radial SuperchargerSuitable for all SNOW Performance Boost Cooler systems from 2005 onwardsScope of Delivery:Boost Cooler VC-50 OLED control unit, 52mm diameterWiring harnessInstallation Instruction
